I tell you wut, I prefer propane and propane accessories

Important! Before you drill, cut, puncture or do anything with them you need to remove the residual gas or they may explode on you!

1. obtain or make a valve tool for propane cylinder valves (check youtube).
2. screw on a torch head and try to light it to burn off as much as you can EVEN WHEN THE TORCH WONT LIGHT THERE IS STILL PROPANE IN THE CYLINDER
3. outside in a well ventilated area remove the torch and press the center valve in to verify that pressure is equalized
4. look for the fill valve off center on the top, using the valve tool remove the valve.
5. fill the cylinder ALL THE WAY with water, this will force out any remaining gas.
6. the cylinder should now be safe to work on

I’ll pass on reddit AND google.

ATi EGA Wonder, it could do a whopping 640 x 350 with 16 colors!

I work in IT and users will get upset if you give them the “Please put in a ticket” line. So for the people that might grumble at this stance but there is good reasons for it in addition to not clogging up this community it’s good for QA. I’m new to Lemmy so not sure if the SAs and Devs frequent !lemmy_support@lemmy.ml but I suspect they do and driving support questions to a common spot will help analyze need for new features, UI changes, bug fixes, etc.

Just my 2 cents but I like your stance.